View ESW188M050AM4_8436653.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 benefts ? suited for long life, high reliability applications ? operating temperature of up to +105c ? 3,000 C 6,000 hour operating life ? case with ? d 5 mm ? safety vent on the capacitor base overview kemet's esw series of single-ended aluminum electrolytic capacitors are designed for long life (3,000 C 5,000 hours), high reliability, low impedance and high frequency applications. applications typical applications include high frequency switch mode circuits. single-ended aluminum electrolytic capacitors esw series, +105oc part number system esw 157 m 6r3 a c3 aa series capacitance code (pf) tolerance rated voltage (vdc) electrical parameters size code packaging single-ended aluminum electrolytic first two digits represent signifcant fgures for capacitance values. last digit specifes the number of zeros to be added. m = 20% 6r3 = 6.3 010 = 10 016 = 16 025 = 25 035 = 35 050 = 50 063 = 63 100 = 100 a = standard see dimension table see ordering options table one world. one kemet
2 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 ordering options table diameter packaging type lead type lead length (mm) lead and packaging code standard bulk packaging options 4 C 22 4 C 5 6.3 ape reel . lead spaing 8. . a 8 ape reel red 6 . a 10 C 13 16 4 C 8 4 C 8 4 C 5 4 C 6.3 4 C 5, 8 C 16 environmental compliance as an environmentally conscious company, kemet is working continuously with improvements concerning the environmental effects of both our capacitors and their production. in europe (rohs directive) and in some other geographical areas like china, legislation has been put in place to prevent the use of some hazardous materials, such as lead (pb), in electronic equipment. all products in this catalog are produced to help our customers obligations to guarantee their products and fulfll these legislative requirements. the only material of concern in our products has been lead (pb), which has been removed from all designs to fulfll the requirement of containing less than 0.1% of lead in any homogeneous material. kemet will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed. some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings. to clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for rohs compatible capacitors. because of customer requirements, there may appear additional markings such as lf = lead free or lfw = lead free wires on the label. single-ended aluminum electrolytic capacitors C esw series, +105oc
3 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 dimensions C millimeters l p side view terminal end view ll- ll+ d d size code ll+/ll- nominal tolerance nominal tolerance nominal tolerance nominal tolerance nominal tolerance c3 5 0.5 11 +1.5/-0 2 0.5 0.5 nominal 20/15 minimum e3 6.3 0.5 11 +1.5/-0 2.5 0.5 0.5 nominal 20/15 minimum e4 6.3 0.5 15 +2.0/-0 2.5 0.5 0.5 nominal 20/15 minimum g3 8 0.5 11 +1.5/-0 3.5 0.5 0.6 nominal 20/15 minimum g9 8 0.5 12 +2.0/-0 3.5 0.5 0.6 nominal 20/15 minimum g4 8 0.5 15 +2.0/-0 3.5 0.5 0.6 nominal 20/15 minimum g6 8 0.5 20 +2.0/-0 3.5 0.5 0.6 nominal 20/15 minimum h9 10 0.5 12.5 +1.5/-0 5 0.5 0.6 nominal 20/15 minimum h2 10 0.5 15 +2.0/-0 5 0.5 0.6 nominal 20/15 minimum h8 10 0.5 16 +2.0/-0 5 0.5 0.6 nominal 20/15 minimum h4 10 0.5 20 +2.0/-0 5 0.5 0.6 nominal 20/15 minimum h5 10 0.5 25 +2.0/-0 5 0.5 0.6 nominal 20/15 minimum h6 10 0.5 30 +2.0/-0 5 0.5 0.6 nominal 20/15 minimum l2 13 0.5 16 +2.0/-0 5 0.5 0.6 nominal 20/15 minimum l3 13 0.5 20 +2.0/-0 5 0.5 0.6 nominal 20/15 minimum l4 13 0.5 25 +2.0/-0 5 0.5 0.6 nominal 20/15 minimum l7 13 0.5 40 +2.0/-0 5 0.5 0.6 nominal 20/15 minimum l8 13 0.5 30 +2.0/-0 5 0.5 0.6 nominal 20/15 minimum l6 13 0.5 35 +2.0/-0 5 0.5 0.6 nominal 20/15 minimum m8 16 0.5 16 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum m5 16 0.5 20 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum m7 16 0.5 25 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum m2 16 0.5 32 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum m3 16 0.5 36 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum m4 16 0.5 40 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum n6 18 0.5 16 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum n4 18 0.5 20 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum n5 18 0.5 25 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum n1 18 0.5 32 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum n2 18 0.5 36 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum n3 18 0.5 40 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum n3 18 0.5 40 +2.0/-0 7.5 0.5 0.8 nominal 20/15 minimum single-ended aluminum electrolytic capacitors C esw series, +105oc
4 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 performance characteristics item performance characteristics capacitance range 2.2 C 15,000 f capacitance tolerance 20% at 120 hz / 20c rated voltage 6.3 C 100 vdc life test 3,000 C 6,000 hours (see conditions in test method & performance) operating temperature -40c to +105c leakage current i 0.01 cv or 3 a, whichever is greater c = rated capacitance (f), v = rated voltage (vdc). voltage applied for 2 minutes at 20c. impedance z characteristics at 120 hz rated voltage (vdc) 6 10 16 25 35 50 63 100 z (-25c)/z (20c) 4 3 2 2 2 2 2 2 z (-40c)/z (20c) 8 6 4 3 3 3 3 3 compensation factor of ripple current (rc) vs. frequency capacitance range (f) 120 hz 1 khz 10 khz 100 khz 2.2 - 180 0.40 0.75 0.90 1.00 220 - 560 0.50 0.85 0.94 1.00 680 - 1800 0.60 0.87 0.95 1.00 2200 - 3900 0.75 0.90 0.95 1.00 4700 C 15000 0.85 0.95 0.98 1.00 single-ended aluminum electrolytic capacitors C esw series, +105oc
5 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 test method & performance conditions load life test shelf life test temperature 105c 105c test duration can ? 6.3 mm 3,000 hours 1,000 hours can ? = 8.0 mm 4,000 hours can ? = 10.0 mm 5,000 hours can ? 13.0 mm 6,000 hours if dimension is down size, endurance will be 1,000 hours less than standard ripple current maximum ripple current specifed at 100 khz 105c no ripple current applied voltage the sum of dc voltage and the peak ac voltage must not exceed the rated voltage of the capacitor no voltage applied performance the following specifcations will be satisfed when the capacitor is restored to 20c: does not exceed 200% of the specifed value leakage current does not exceed specifed value shelf life the capacitance, esr and impedance of a capacitor will not change signifcantly after extended storage periods, however the leakage current will very slowly increase. kemet's e-series aluminum electrolytic capacitors should not be stored in high temperatures or where there is a high level of humidity . the suitable storage condition for kemet's e-series aluminum electrolytic capacitors is +5 to +35oc and less than 75% in relative humidity. kemet's e-series aluminum electrolytic capacitors should not be stored in damp conditions such as water, saltwater spray or oil spray. kemet's e-series aluminum electrolytic capacitors should not be stored in an environment full of hazardous gas (hydrogen sulphide , sulphurous acid gas, nitrous acid, chlorine gas, ammonium, etc.) kemet's e-series aluminum electrolytic capacitors should not be stored under exposure to ozone, ultraviolet rays or radiation. if a capacitor has been stored for more than 18 months under these conditions and it shows increased leakage current, then a treatment by voltage application is recommended. re-age (reforming) procedure apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen to a steady value below the specifed limit. during re-aging a maximum charging current of twice the specifed leakage current or 5 ma (whichever is greater) is suggested. single-ended aluminum electrolytic capacitors C esw series, +105oc
6 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 table 1 C ratings & part number reference (1) insert packaging code. see ordering options table for available options. 1 when capacitance exceeds 1,000 f, the df value (%) is increased by 2% for every additional 1,000 f. * dimension is down size, endurance will be less 1,000 hours than standard. vdc vdc surge voltage rated capacitance 120 hz 20c (f) case size d x l (mm) df 120 hz 20c (tan %) 1 z 100 khz 20oc () rc 100 khz 105c (ma) lc 20oc 2 minutes (a) part number 6.3 8 150 5 x 11 22 0.580 210 9.0 esw157m6r3ac3(1) 6.3 8 330 6.3 x 11 22 0.220 340 21.0 esw337m6r3ae3(1) 6.3 8 470 6.3 x 11 22 0.160 510 30.0 esw477m6r3ae3(1) 6.3 8 680 8 x 11 22 0.130 640 43.0 esw687m6r3ag3(1) 6.3 8 820 10 x 12.5 22 0.800 865 52.0 esw827m6r3ah9(1) 6.3 8 1000 8 x 15 22 0.870 840 63.0 esw108m6r3ag4(1) 6.3 8 1200 8 x 20 22 0.069 1050 76.0 esw128m6r3ag6(1) 6.3 8 1200 10 x 16 22 0.060 1210 76.0 esw128m6r3ah8(1) 6.3 8 1500 8 x 20 22 0.069 1050 94.0 esw158m6r3ag6(1) 6.3 8 1500 *10 x 16 22 0.060 1210 94.0 esw158m6r3ah8(1) 6.3 8 1500 10 x 20 22 0.046 1400 94.0 esw158m6r3ah4(1) 6.3 8 1800 13 x 16 22 0.049 1450 114.0 esw188m6r3al2(1) 6.3 8 2200 *10 x 20 22 0.046 1400 139.0 esw228m6r3ah4(1) 6.3 8 2200 10 x 25 22 0.042 1650 139.0 esw228m6r3ah5(1) 6.3 8 2700 10 x 30 22 0.031 1910 170.0 esw278m6r3ah6(1) 6.3 8 2700 16 x 16 22 0.042 1940 170.0 esw278m6r3am8(1) 6.3 8 3300 10 x 25 22 0.042 1650 208.0 esw338m6r3ah5(1) 6.3 8 3300 13 x 20 22 0.035 1900 208.0 esw338m6r3al3(1) 6.3 8 3900 13 x 25 22 0.027 2230 246.0 esw398m6r3al4(1) 6.3 8 3900 18 x 16 22 0.043 2210 246.0 esw398m6r3an6(1) 6.3 8 4700 13 x 30 22 0.024 2650 296.0 esw478m6r3al8(1) 6.3 8 5600 13 x 35 22 0.020 2880 353.0 esw568m6r3al6(1) 6.3 8 5600 16 x 20 22 0.027 2530 353.0 esw568m6r3am5(1) 6.3 8 6800 13 x 40 22 0.017 3350 428.0 esw688m6r3al7(1) 6.3 8 6800 16 x 25 22 0.021 2930 428.0 esw688m6r3am7(1) 6.3 8 6800 18 x 20 22 0.026 2860 428.0 esw688m6r3an4(1) 6.3 8 8200 16 x 32 22 0.017 3450 517.0 esw828m6r3am2(1) 6.3 8 10000 16 x 36 22 0.015 3610 630.0 esw109m6r3am3(1) 6.3 8 10000 18 x 25 22 0.017 3140 630.0 esw109m6r3an5(1) 6.3 8 12000 18 x 32 22 0.015 4170 756.0 esw129m6r3an1(1) 6.3 8 15000 18 x 36 22 0.014 4220 945.0 esw159m6r3an2(1) 10 13 100 5 x 11 19 0.580 210 10.0 esw107m010ac3(1) 10 13 220 6.3 x 11 19 0.220 340 22.0 esw227m010ae3(1) 10 13 470 8 x 11 19 0.130 640 47.0 esw477m010ag3(1) 10 13 680 8 x 15 19 0.087 840 68.0 esw687m010ag4(1) 10 13 820 10 x 12.5 19 0.080 865 68.0 esw827m010ah9(1) 10 13 1000 8 x 20 19 0.069 1050 100.0 esw108m010ag6(1) 10 13 1000 10 x 16 19 0.060 1210 100.0 esw108m010ah8(1) 10 13 1200 10 x 20 19 0.046 1400 120.0 esw128m010ah4(1) 10 13 1500 10 x 25 19 0.042 1650 150.0 esw158m010ah5(1) 10 13 1500 13 x 16 19 0.049 1450 150.0 esw158m010al2(1) 10 13 2200 10 x 30 19 0.031 1910 220.0 esw228m010ah6(1) 10 13 2200 13 x 20 19 0.042 1900 220.0 esw228m010al3(1) 10 13 2200 16 x 16 19 0.042 1940 220.0 esw228m010am8(1) 10 13 2700 18 x 16 19 0.043 2210 270.0 esw278m010an6(1) 10 13 3300 10 x 30 19 0.031 1910 330.0 esw338m010ah6(1) 10 13 3300 13 x 25 19 0.027 2230 330.0 esw338m010al4(1) 10 13 3900 13 x 30 19 0.024 2650 390.0 esw398m010al8(1) 10 13 3900 16 x 20 19 0.027 2530 390.0 esw398m010am5(1) 10 13 4700 13 x 35 19 0.020 2880 470.0 esw478m010al6(1) 10 13 5600 13 x 40 19 0.017 3350 560.0 esw568m010al7(1) 10 13 5600 16 x 25 19 0.021 2930 560.0 esw568m010am7(1) 10 13 5600 18 x 20 19 0.026 2860 560.0 esw568m010an4(1) 10 13 6800 16 x 32 19 0.017 2450 680.0 esw688m010am2(1) 10 13 6800 18 x 25 19 0.019 3140 680.0 esw688m010an5(1) 10 13 8200 16 x 36 19 0.015 3610 820.0 esw828m010am3(1) vdc vdc surge rated capacitance case size df z rc lc part number single-ended aluminum electrolytic capacitors C esw series, +105oc
7 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 table 1 C ratings & part number reference cont'd (1) insert packaging code. see ordering options table for available options. 1 when capacitance exceeds 1,000 f, the df value (%) is increased by 2% for every additional 1,000 f. * dimension is down size, endurance will be less 1,000 hours than standard. vdc vdc surge voltage rated capacitance 120 hz 20c (f) case size d x l (mm) df 120 hz 20c (tan %) 1 z 100 khz 20oc () rc 100 khz 105c (ma) lc 20oc 2 minutes (a) part number 10 13 8200 18 x 32 19 0.015 4170 820.0 esw828m010an1(1) 10 13 10000 16 x 40 19 0.013 4080 1000.0 esw109m010am4(1) 10 13 10000 18 x 36 19 0.014 4220 1000.0 esw109m010an2(1) 10 13 15000 18 x 40 19 0.012 4280 1500.0 esw159m010an3(1) 16 20 56 5 x 11 16 0.580 210 9.0 esw566m016ac3(1) 16 20 100 6.3 x 11 16 0.230 250 16.0 esw107m016ae3(1) 16 20 120 6.3 x 11 16 0.220 340 19.0 esw127m016ae3(1) 16 20 220 6.3 x 11 16 0.185 469 35.0 esw227m016ae3(1) 16 20 220 8 x 11 16 0.150 582 35.0 esw227m016ag3(1) 16 20 330 8 x 11 16 0.130 640 53.0 esw337m016ag3(1) 16 20 470 *8 x 15 16 0.087 840 75.0 esw477m016ag4(1) 16 20 470 8 x 20 16 0.078 950 75.0 esw477m016ag6(1) 16 20 470 *10 x 12.5 16 0.080 865 75.0 esw477m016ah9(1) 16 20 470 10 x 16 16 0.060 1210 75.0 esw477m016ah8(1) 16 20 680 8 x 20 16 0.069 1050 109.0 esw687m016ag6(1) 16 20 680 10 x 16 16 0.060 1210 109.0 esw687m016ah8(1) 16 20 1000 8 x 20 16 0.069 1050 160.0 esw108m016ag6(1) 16 20 1000 *10 x 16 16 0.060 1210 160.0 esw108m016ah8(1) 16 20 1000 10 x 20 16 0.046 1400 160.0 esw108m016ah4(1) 16 20 1000 13 x 16 16 0.049 1450 160.0 esw108m016al2(1) 16 20 1200 10 x 25 16 0.042 1650 192.0 esw128m016ah5(1) 16 20 1500 10 x 30 16 0.031 1910 240.0 esw158m016ah6(1) 16 20 1500 13 x 20 16 0.035 1900 240.0 esw158m016al3(1) 16 20 1500 16 x 16 16 0.042 1940 240.0 esw158m016am8(1) 16 20 2200 13 x 25 16 0.027 2230 352.0 esw228m016al4(1) 16 20 2200 18 x 16 16 0.043 2210 352.0 esw228m016an6(1) 16 20 2700 13 x 30 16 0.024 2650 432.0 esw278m016al8(1) 16 20 2700 16 x 20 16 0.027 2530 432.0 esw278m016am5(1) 16 20 3300 13 x 35 16 0.020 2880 528.0 esw338m016al6(1) 16 20 3900 13 x 40 16 0.017 3350 624.0 esw398m016al7(1) 16 20 3900 16 x 25 16 0.021 2930 624.0 esw398m016am7(1) 16 20 3900 18 x 20 16 0.026 2860 624.0 esw398m016an4(1) 16 20 4700 16 x 32 16 0.017 3450 752.0 esw478m016am2(1) 16 20 4700 18 x 25 16 0.019 3140 752.0 esw478m016an5(1) 16 20 5600 16 x 36 16 0.015 3610 896.0 esw568m016am3(1) 16 20 5600 18 x 32 16 0.015 4170 896.0 esw568m016an1(1) 16 20 6800 16 x 40 16 0.013 4080 1088.0 esw688m016am4(1) 16 20 8200 18 x 36 16 0.014 4220 1312.0 esw828m016an2(1) 16 20 10000 18 x 40 16 0.012 4280 1600.0 esw109m016an3(1) 25 32 47 5 x 11 14 0.580 210 12.0 esw476m025ac3(1) 25 32 100 6.3 x 11 14 0.220 340 25.0 esw107m025ae3(1) 25 32 150 8 x 11 14 0.160 640 37.0 esw157m025ag3(1) 25 32 220 8 x 11 14 0.130 640 55.0 esw227m025ag3(1) 25 32 330 8 x 15 14 0.087 840 82.0 esw337m025ag4(1) 25 32 330 10 x 12.5 14 0.080 865 82.0 esw337m025ah9(1) 25 32 470 8 x 20 14 0.069 1050 117.0 esw477m025ag6(1) 25 32 470 *10 x 12.5 14 0.070 1050 117.0 esw477m025ah9(1) 25 32 470 10 x 16 14 0.060 1210 117.0 esw477m025ah8(1) 25 32 680 10 x 20 14 0.046 1400 170.0 esw687m025ah4(1) 25 32 680 13 x 16 14 0.049 1450 170.0 esw687m025al2(1) 25 32 820 10 x 25 14 0.042 1650 205.0 esw827m025ah5(1) 25 32 1000 10 x 30 14 0.031 1910 250.0 esw108m025ah6(1) 25 32 1000 13 x 20 14 0.035 1900 250.0 esw108m025al3(1) 25 32 1000 16 x 16 14 0.042 1940 250.0 esw108m025am8(1) 25 32 1200 18 x 16 14 0.043 2210 250.0 esw128m025an6(1) 25 32 1500 *13 x 20 14 0.035 1900 375.0 esw158m025al3(1) vdc vdc surge rated capacitance case size df z rc lc part number single-ended aluminum electrolytic capacitors C esw series, +105oc
8 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 vdc vdc surge voltage rated capacitance 120 hz 20c (f) case size d x l (mm) df 120 hz 20c (tan %) 1 z 100 khz 20oc () rc 100 khz 105c (ma) lc 20oc 2 minutes (a) part number 25 32 1500 13 x 25 14 0.027 2230 375.0 esw158m025al4(1) 25 32 1800 13 x 30 14 0.024 2650 450.0 esw188m025al8(1) 25 32 1800 16 x 20 14 0.027 2530 450.0 esw188m025am5(1) 25 32 2200 13 x 35 14 0.020 2880 550.0 esw228m025al6(1) 25 32 2200 18 x 20 14 0.026 2860 550.0 esw228m025an4(1) 25 32 2700 13 x 40 14 0.017 3350 675.0 esw278m025al7(1) 25 32 2700 16 x 25 14 0.021 2930 675.0 esw278m025am7(1) 25 32 3300 16 x 32 14 0.017 3450 825.0 esw338m025am2(1) 25 32 3300 18 x 25 14 0.019 3140 825.0 esw338m025an5(1) 25 32 3900 18 x 32 14 0.015 4170 975.0 esw398m025an1(1) 25 32 4700 18 x 36 14 0.014 4220 1175.0 esw478m025an2(1) 25 32 6800 18 x 40 14 0.012 4280 1700.0 esw688m025an3(1) 35 44 4.7 5 x 11 12 2.400 95 3.0 esw475m035ac3(1) 35 44 10 5 x 11 12 1.600 130 3.0 esw106m035ac3(1) 35 44 33 5 x 11 12 0.580 210 12.0 esw336m035ac3(1) 35 44 47 6.3 x 11 12 0.390 275 16.0 esw476m035ae3(1) 35 44 56 6.3 x 11 12 0.220 340 20.0 esw566m035ae3(1) 35 44 68 6.3 x 15 12 0.170 500 29.0 esw686m035ae4(1) 35 44 82 6.3 x 15 12 0.160 540 29.0 esw826m035ae4(1) 35 44 100 8 x 11 12 0.150 580 35.0 esw107m035ag3(1) 35 44 150 8 x 11 12 0.130 640 52.0 esw157m035ag3(1) 35 44 220 *8 x 15 12 0.087 840 77.0 esw227m035ag4(1) 35 44 220 10 x 12.5 12 0.080 865 77.0 esw227m035ah9(1) 35 44 270 8 x 20 12 0.069 1050 95.0 esw277m035ag6(1) 35 44 330 *10 x 16 12 0.060 1210 115.0 esw337m035ah8(1) 35 44 330 10 x 20 12 0.046 1400 115.0 esw337m035ah4(1) 35 44 470 10 x 20 12 0.046 1400 164.0 esw477m035ah4(1) 35 44 470 13 x 16 12 0.049 1450 164.0 esw477m035al2(1) 35 44 560 10 x 25 12 0.042 1650 196.0 esw567m035ah5(1) 35 44 680 10 x 30 12 0.031 1910 238.0 esw687m035ah6(1) 35 44 680 13 x 20 12 0.035 1900 238.0 esw687m035al3(1) 35 44 680 16 x 16 12 0.042 1940 238.0 esw687m035am8(1) 35 44 820 13 x 20 12 0.035 1900 287.0 esw827m035al3(1) 35 44 1000 13 x 25 12 0.027 2230 350.0 esw108m035al4(1) 35 44 1000 18 x 16 12 0.043 2210 350.0 esw108m035an6(1) 35 44 1200 13 x 30 12 0.024 2650 420.0 esw128m035al8(1) 35 44 1200 16 x 20 12 0.027 2530 420.0 esw128m035am5(1) 35 44 1500 13 x 35 12 0.020 2880 525.0 esw158m035al6(1) 35 44 1800 13 x 40 12 0.017 3350 630.0 esw188m035al7(1) 35 44 1800 16 x 25 12 0.021 2930 630.0 esw188m035am7(1) 35 44 1800 18 x 20 12 0.026 2860 630.0 esw188m035an4(1) 35 44 2200 16 x 32 12 0.017 3450 770.0 esw228m035am2(1) 35 44 2200 18 x 25 12 0.019 3140 770.0 esw228m035an5(1) 35 44 2700 16 x 36 12 0.015 3610 945.0 esw278m035am3(1) 35 44 2700 18 x 32 12 0.015 4170 945.0 esw278m035an1(1) 35 44 3300 16 x 40 12 0.013 4080 1155.0 esw338m035am4(1) 35 44 3300 18 x 36 12 0.014 4220 1155.0 esw338m035an2(1) 35 44 4700 18 x 40 12 0.012 4280 1645.0 esw478m035an3(1) 50 63 2.2 5 x 11 10 2.280 85 3.0 esw225m050ac3(1) 50 63 4.7 5 x 11 10 2.000 100 3.0 esw475m050ac3(1) 50 63 10 5 x 11 10 1.200 135 5.0 esw106m050ac3(1) 50 63 22 5 x 11 10 0.700 180 11.0 esw226m050ac3(1) 50 63 33 6.3 x 11 10 0.490 245 16.0 esw336m050ae3(1) 50 63 47 6.3 x 11 10 0.520 300 23.0 esw476m050ae3(1) 50 63 56 6.3 x 15 10 0.300 295 28.0 esw566m050ae4(1) 50 63 100 8 x 11 10 0.170 555 50.0 esw107m050ag3(1) vdc vdc surge rated capacitance case size df z rc lc part number table 1 C ratings & part number reference cont'd (1) insert packaging code. see ordering options table for available options. 1 when capacitance exceeds 1,000 f, the df value (%) is increased by 2% for every additional 1,000 f. * dimension is down size, endurance will be less 1,000 hours than standard. single-ended aluminum electrolytic capacitors C esw series, +105oc
9 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 vdc vdc surge voltage rated capacitance 120 hz 20c (f) case size d x l (mm) df 120 hz 20c (tan %) 1 z 100 khz 20oc () rc 100 khz 105c (ma) lc 20oc 2 minutes (a) part number 50 63 120 8 x 15 10 0.120 730 60.0 esw127m050ag4(1) 50 63 150 10 x 12.5 10 0.120 760 75.0 esw157m050ah9(1) 50 63 180 8 x 20 10 0.091 910 90.0 esw187m050ag6(1) 50 63 220 10 x 16 10 0.084 1050 110.0 esw227m050ah8(1) 50 63 270 10 x 20 10 0.060 1220 135.0 esw277m050ah4(1) 50 63 270 13 x 16 10 0.061 1260 135.0 esw277m050al2(1) 50 63 330 *10 x 20 10 0.058 1400 165.0 esw337m050ah4(1) 50 63 330 10 x 25 10 0.055 1440 165.0 esw337m050ah5(1) 50 63 470 10 x 30 10 0.043 1690 235.0 esw477m050ah6(1) 50 63 470 13 x 20 10 0.045 1660 235.0 esw477m050al3(1) 50 63 470 16 x 16 10 0.055 1690 235.0 esw477m050am8(1) 50 63 560 13 x 25 10 0.034 1950 280.0 esw567m050al4(1) 50 63 560 18 x 16 10 0.054 1930 280.0 esw567m050an6(1) 50 63 680 13 x 30 10 0.030 2310 340.0 esw687m050al8(1) 50 63 820 13 x 35 10 0.025 2510 410.0 esw827m050al6(1) 50 63 820 16 x 20 10 0.034 2210 410.0 esw827m050am5(1) 50 63 1000 13 x 40 10 0.021 2920 500.0 esw108m050al7(1) 50 63 1000 16 x 25 10 0.025 2555 500.0 esw108m050am7(1) 50 63 1000 18 x 20 10 0.036 2490 500.0 esw108m050an4(1) 50 63 1200 16 x 32 10 0.022 3010 600.0 esw128m050am2(1) 50 63 1200 18 x 25 10 0.026 2740 600.0 esw128m050an5(1) 50 63 1500 16 x 36 10 0.019 3150 750.0 esw158m050am3(1) 50 63 1800 16 x 40 10 0.016 3710 900.0 ESW188M050AM4(1) 50 63 1800 18 x 32 10 0.021 3635 900.0 esw188m050an1(1) 50 63 2200 18 x 36 10 0.017 3680 1100.0 esw228m050an2(1) 63 79 15 5 x 11 9 2.300 55 9.0 esw156m063ac3(1) 63 79 33 6.3 x 11 9 1.200 115 21.0 esw336m063ae3(1) 63 79 56 8 x 12 9 0.630 232 30.0 esw566m063ag9(1) 63 79 82 8 x 15 9 0.450 300 52.0 esw826m063ag4(1) 63 79 82 10 x 12.5 9 0.430 288 52.0 esw826m063ah9(1) 63 79 120 8 x 20 9 0.330 362 76.0 esw127m063ag6(1) 63 79 120 10 x 16 9 0.310 357 76.0 esw127m063ah8(1) 63 79 180 10 x 20 9 0.210 466 113.0 esw187m063ah4(1) 63 79 180 13 x 16 9 0.230 466 113.0 esw187m063al2(1) 63 79 220 10 x 25 9 0.200 531 139.0 esw227m063ah5(1) 63 79 270 10 x 30 9 0.150 663 170.0 esw277m063ah6(1) 63 79 270 13 x 20 9 0.160 690 170.0 esw277m063al3(1) 63 79 270 16 x 16 9 0.140 795 170.0 esw277m063am8(1) 63 79 330 13 x 25 9 0.120 784 208.0 esw337m063al4(1) 63 79 390 18 x 16 9 0.120 920 246.0 esw397m063an6(1) 63 79 470 13 x 30 9 0.100 905 296.0 esw477m063al8(1) 63 79 470 16 x 20 9 0.091 1040 296.0 esw477m063am5(1) 63 79 560 13 x 35 9 0.093 1050 353.0 esw567m063al6(1) 63 79 560 16 x 25 9 0.073 1250 353.0 esw567m063am7(1) 63 79 680 13 x 40 9 0.071 1180 428.0 esw687m063al7(1) 63 79 680 18 x 20 9 0.080 1240 428.0 esw687m063an4(1) 63 79 820 16 x 32 9 0.054 1570 517.0 esw827m063am2(1) 63 79 820 18 x 25 9 0.057 1490 517.0 esw827m063an5(1) 63 79 1000 16 x 36 9 0.045 1790 630.0 esw108m063am3(1) 63 79 1000 18 x 32 9 0.047 1630 630.0 esw108m063an1(1) 63 79 1200 18 x 32 9 0.040 2020 756.0 esw128m063an1(1) 100 125 6.8 5 x 11 8 2.300 55 7.0 esw685m100ac3(1) 100 125 15 6.3 x 11 8 1.200 115 15.0 esw156m100ae3(1) 100 125 27 8 x 12 8 0.630 232 33.0 esw276m100ag9(1) 100 125 39 8 x 15 8 0.450 300 39.0 esw396m100ag4(1) 100 125 47 10 x 12.5 8 0.430 288 47.0 esw476m100ah9(1) vdc vdc surge rated capacitance case size df z rc lc part number table 1 C ratings & part number reference cont'd (1) insert packaging code. see ordering options table for available options. 1 when capacitance exceeds 1,000 f, the df value (%) is increased by 2% for every additional 1,000 f. * dimension is down size, endurance will be less 1,000 hours than standard. single-ended aluminum electrolytic capacitors C esw series, +105oc
10 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 vdc vdc surge voltage rated capacitance 120 hz 20c (f) case size d x l (mm) df 120 hz 20c (tan %) 1 z 100 khz 20oc () rc 100 khz 105c (ma) lc 20oc 2 minutes (a) part number 100 125 56 8 x 20 8 0.330 362 56.0 esw566m100ag6(1) 100 125 68 10 x 16 8 0.310 357 68.0 esw686m100ah8(1) 100 125 82 10 x 20 8 0.210 466 82.0 esw826m100ah4(1) 100 125 82 13 x 16 8 0.230 466 82.0 esw826m100al2(1) 100 125 100 10 x 25 8 0.200 531 100.0 esw107m100ah5(1) 100 125 120 10 x 30 8 0.150 663 120.0 esw127m100ah6(1) 100 125 120 13 x 20 8 0.160 690 120.0 esw127m100al3(1) 100 125 150 16 x 16 8 0.140 795 150.0 esw157m100am8(1) 100 125 180 13 x 25 8 0.120 784 180.0 esw187m100al4(1) 100 125 180 18 x 16 8 0.120 920 180.0 esw187m100an6(1) 100 125 220 13 x 30 8 0.100 905 220.0 esw227m100al8(1) 100 125 220 16 x 20 8 0.091 1040 220.0 esw227m100am5(1) 100 125 270 13 x 35 8 0.083 1050 270.0 esw277m100al6(1) 100 125 270 16 x 25 8 0.073 1250 270.0 esw277m100am7(1) 100 125 330 13 x 40 8 0.071 1180 330.0 esw337m100al7(1) 100 125 330 18 x 20 8 0.080 1240 330.0 esw337m100an4(1) 100 125 390 16 x 32 8 0.054 1570 390.0 esw397m100am2(1) 100 125 390 18 x 25 8 0.057 1490 390.0 esw397m100an5(1) 100 125 470 16 x 36 8 0.045 1790 470.0 esw477m100am3(1) 100 125 470 18 x 32 8 0.047 1630 470.0 esw477m100an1(1) 100 125 560 16 x 40 8 0.040 2020 560.0 esw567m100am4(1) 100 125 680 18 x 36 8 0.040 1790 680.0 esw687m100an2(1) 100 125 820 18 x 40 8 0.036 2330 820.0 esw827m100an3(1) vdc vdc surge rated capacitance case size df z rc lc part number table 1 C ratings & part number reference cont'd (1) insert packaging code. see ordering options table for available options. 1 when capacitance exceeds 1,000 f, the df value (%) is increased by 2% for every additional 1,000 f. * dimension is down size, endurance will be less 1,000 hours than standard. single-ended aluminum electrolytic capacitors C esw series, +105oc
11 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 mounting positions (safety vent) in operation, electrolytic capacitors will always conduct a leakage current which causes electrolysis. the oxygen produced by electrolysis will regenerate the dielectric layer but, at the same time, the hydrogen released may cause the internal pressure of the capacitor to increase. the overpressure vent (safety vent) ensures that the gas can escape when the pressure reaches a certain value. all mounting positions must allow the safety vent to work properly. installing ? a general principle is that lower-use temperatures result in a longer, useful life of the capacitor. for this reason, it should be ensured that electrolytic capacitors are placed away from heat-emitting components. adequate space should be allowed between components for cooling air to circulate, particularly when high ripple current loads are applied. in any case, the maximum category temperature must not be exceeded. ? do not deform the case of capacitors or use capacitors with a deformed case. ? verify that the connections of the capacitors are able to insert on the board without excessive mechanical force. ? if the capacitors require mounting through additional means, the recommended mounting accessories shall be used. ? verify the correct polarization of the capacitor on the board. ? verify that the space around the pressure relief device is according to the following guideline: case diameter space around safety vent 16 mm > 2 mm > 16 to 40 mm > 3 mm > 40 mm > 5 mm it is recommended that capacitors always be mounted with the safety device uppermost or in the upper part of the capacitor. ? if the capacitors are stored for a long time, the leakage current must be verif ed. if the leakage current is superior to the value listed in this catalog, the capacitors must be reformed. in this case, they can be reformed by application of the rated voltage through a series resistor approximately 1 k for capacitors with v r 160 v (5 w resistor) and 10 k for the other rated voltages. ? in the case of capacitors connected in series, a suitable voltage sharing must be used. in the case of balancing resistors, the approximate resistance value can be calculated as: r = 60/c kemet recommends, nevertheless, to ensure that the voltage across each capacitor does not exceed its rated voltage. single-ended aluminum electrolytic capacitors C esw series, +105oc
12 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 application and operation guidelines electrical ratings: capacitance (esc) simpli? ed equivalent circuit diagram of an electrolytic capacitor the capacitive component of the equivalent series circuit (equivalent series capacitance esc) is determined by applying an alternate yrowdjhri9dwdiuhtxhfriru+dg&,(& temperature dependence of the capacitance capacitance of an electrolytic capacitor depends upon temperature: with decreasing temperature the viscosity of the electrolyte increases, thereby reducing its conductivity. capacitance will decrease if temperature decreases. furthermore, temperature drifts cause armature dilatation and, therefore, capacitance changes (up to 20% depending on the series considered, from 0 to 80c). this phenomenon is more evident for electrolytic capacitors than for other types. frequency dependence of the capacitance effective capacitance value is derived from the impedance curve, as long as impedance is still in the range where the capacitance component is dominant. c = 1 c = capacitance (f) i= f = frequency (hz) = ,pshgdfh capacitance change (%) capacitance change vs. temperature (typical value) temperature (c) capacitance change (%) capacitance change vs. frequency (typical value) frequency (khz) single-ended aluminum electrolytic capacitors C esw series, +105oc
13 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 dissipation factor tan (df) dissipation factor tan is the ratio between the active and reactive power for a sinusoidal waveform voltage. it can be thought of as a measurement of the gap between an actual and ideal capacitor. reactive active ideal actual tan is measured with the same set-up used for the series capacitance esc. tan = x esc x esr where: esc = equivalent series capacitance esr = equivalent series resistance dissipation factor (%) dissipation factor vs. frequency (typical value) frequency (khz) dissipation factor (%) dissipation factor vs. temperature (typical value) temperature (c) single-ended aluminum electrolytic capacitors C esw series, +105oc
14 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 equivalent series inductance (esl) equivalent series inductance or self inductance results from the terminal conf guration and internal design of the capacitor. equivalent series capacitance (esc) equivalent series resistance (esr) equivalent series inductance (esl) capacitor equivalent internal circuit equivalent series resistance (esr) equivalent series resistance is the resistive component of the equivalent series circuit. esr value depends on frequency and temperature and is related to the tan by the following equation: esr = equivalent series resistance () esr = tan tan = dissipation factor 2f esc esr () esr change vs. frequency (typical value) frequency (khz) esr () esr change vs. temperature (typical value) temperature (c) single-ended aluminum electrolytic capacitors C esw series, +105oc
15 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 impedance (z) impedance of an electrolytic capacitor results from a circuit formed by the following individual equivalent series components: c o r e l c e c o r e l c e c o = aluminum oxide capacitance (surface and thickness of the dielectric) r e = resistance of electrolyte and paper mixture (other resistances not depending on the frequency are not considered: tabs, plates, etc.) c e = electrolyte soaked paper capacitance l = inductive reactance of the capacitor winding and terminals impedance of an electrolytic capacitor is not a constant quantity that retains its value under all conditions; it changes depending on frequency and temperature. impedance as a function of frequency (sinusoidal waveform) for a certain temperature can be represented as follows: ? capacitive reactance predominates at low frequencies ? with increasing frequency, capacitive reactance xc = 1/c o decreases until it reaches the order of magnitude of electrolyte resistance r e (a) ? at even higher frequencies, resistance of the electrolyte predominates: z = r e (a - b) ? when the capacitors resonance frequency is reached ( 0 ), capacitive and inductive reactance mutually cancel each other 1/c e = l, 0 = c 1/lce ? above this frequency, inductive reactance of the winding and its terminals (xl = z = l) becomes effective and leads to an increase in impedance generally speaking, it can be estimated that c e 0.01 c o . single-ended aluminum electrolytic capacitors C esw series, +105oc 0 . 0 0 0 1 0 0 0 0 0 . 1 1 1 0 1 0 0 1 1 1 1 0 1 0 0 1 0 0 0 z [ z ] o h m ] f [ k h b c a 1 / c o r e 1 / c c e l o r e l c e
16 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 impedance (z) contd impedance as a function of frequency (sinusoidal waveform) for different temperature values can be represented as follows (typical values): r e is the most temperature-dependent component of an electrolytic capacitor equivalent circuit. electrolyte resistivity will decrease if temperature rises. in order to obtain a low impedance value throughout the temperature range, r e must be as little as possible. however, r e values that are too low indicate a very aggressive electrolyte, resulting in a shorter life of the electrolytic capacitor at high temperatures. a compromise must be reached. leakage current (lc) due to the aluminum oxide layer that serves as a dielectric, a small current will continue to ? ow even after a dc voltage has been applied for long periods. this current is called leakage current. a high leakage current ? ows after applying voltage to the capacitor then decreases in a few minutes, e.g., after prolonged storage without any applied voltage. in the course of continuous operation, the leakage current will decrease and reach an almost constant value. after a voltage-free storage the oxide layer may deteriorate, especially at high temperature. since there are no leakage currents to transport oxygen ions to the anode, the oxide layer is not regenerated. the result is that a higher than normal leakage current will ? ow when voltage is applied after prolonged storage. single-ended aluminum electrolytic capacitors C esw series, +105oc z ( z ) o h m ) f ( k h 8 5 c 2 0 c 10 f - 4 0 c 0 . 1 1 1 0 1 0 0 1 0 0 0 1 0 0 0 0 0 . 1 1 1 0 1 0 0 1 0 0 0
17 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 leakage current (lc) contd as the oxide layer is regenerated in use, the leakage current will gradually decrease to its normal level. the relationship between the leakage current and voltage applied at constant temperature can be shown schematically as follows: where: v f = forming voltage if this level is exceeded, a large quantity of heat and gas will be generated and the capacitor could be damaged. v r = rated voltage this level represents the top of the linear part of the curve. v s = surge voltage this lies between v r and v f . the capacitor can be subjected to v s for short periods only. electrolytic capacitors are subjected to a reforming process before acceptance testing. the purpose of this preconditioning is to ensure that the same initial conditions are maintained when comparing different products. ripple current (rc) the maximum ripple current value depends on: ? ambient temperature ? surface area of the capacitor (heat dissipation area) tan or esr ? frequency the capacitors life depends on the thermal stress. frequency dependence of the ripple current esr and, thus, the tan depend on the frequency of the applied voltage. this indicates that the allowed ripple current is also a function of the frequency. temperature dependence of the ripple current the data sheet specif es maximum ripple current at the upper category temperature for each capacitor. expected life calculation expected life depends on operating temperature according to the following formula: l = lo x 2 (to-t)/10 where: l: expected life lo: load life at maximum permissible operating temperature t: actual operating temperature to: maximum permissible operating temperature this formula is applicable between 40c and to. i v r v f v v s actual operating temperature (c) expected life calculation chart expected life (h) single-ended aluminum electrolytic capacitors C esw series, +105oc
18 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 packaging quantities size code diameter (mm) length (mm) bulk standard leads auto-insertion cut leads ammo tape & reel c3 5 11 10000 15000 2000 2600 e3 6.3 11 10000 15000 2000 2200 e4 6.3 15 10000 15000 2000 2200 g3 8 11 6000 8000 1000 1500 g9 8 12 6000 8000 1000 1500 g4 8 15 5000 5000 1000 1500 g6 8 20 4000 4000 1000 1500 h9 10 12.5 4000 4000 700 1200 h8 10 16 3000 4000 700 1200 h4 10 20 2400 3000 700 1200 h5 10 25 2400 2400 500 h6 10 30 2000 2000 500 l2 13 16 2400 2400 500 l3 13 20 2000 2000 500 l4 13 25 1600 1600 500 l8 13 30 1200 1200 500 l6 13 35 1000 500 500 l7 13 40 1000 500 500 m8 16 16 1000 1000 300 m5 16 20 1000 500 300 m7 16 25 1000 500 300 m2 16 32 800 500 300 m3 16 36 600 500 300 m4 16 40 600 500 300 n6 18 16 800 1000 300 n4 18 20 800 500 300 n5 18 25 800 500 300 n1 18 32 500 500 n2 18 36 500 500 n3 18 40 500 500 single-ended aluminum electrolytic capacitors C esw series, +105oc
19 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 construction marking kemet logo polarity stripe (-) rated capacitance rated voltage (vdc) series, rated temperature date code year*/month* manufacturing internal codes *y = year code 01 02 03 04 05 06 07 08 09 year 2011 2012 2013 2014 2015 2016 2017 2018 2019 *m = month code 01 02 03 04 05 06 07 08 09 10 11 12 month 1 2 3 4 5 6 7 8 9 10 11 12 detailed cross section margin lead (+) rubber seal polarity stripe (-) rubber seal insulating sleeve aluminum can with safety vent lead (-) terminal tabs lead terminal tab aluminum can insulating sleeve anode aluminum foil, etched, covered with aluminum oxide (fourth layer) cathode aluminum foil, etched (second layer) paper spacer impregnated with electrolyte (first layer) paper spacer impregnated with electrolyte (third layer) ? kemet logo ? series ? operating temperature (c) ? rated capacitance (f) ? rated voltage (vdc) ? negative polarity: white line ? date code single-ended aluminum electrolytic capacitors C esw series, +105oc
20 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 taping for automatic insertion machines dimensions (mm) d l p d p p0 p1 p2 w w0 w1 w2 h0 h1 i d0 t tolerance +0.5 +0.8/-0.2 0.05 1 .0 0 .3 0 .7 1 .3 +1/-0.5 0.5 maximum maximum 0.75 0.5 maximum 0.2 0.2 formed to 2.5 mm 4 5-7 2.5 0.45 12.7 12.7 5.1 6.35 18 12 11 3 16 18.5 4 0.7 5 7 7 7 7 7 7 7 single-ended aluminum electrolytic capacitors C esw series, +105oc 1 d p 0 w 0 w 2 w d p 0 p 2 p d m a p o u n t i n g t e d 0 l 0 formed to 2.5 mm (lead and packaging code la and fa) h d 0 t a p m o u n t i n g e a d p e h e s i v e t a h w 0 w 2 w d p formed to 5 mm (lead and packaging code ja and da) 0 p 2 p l p d p 1 1 w d 0 t a p m o u n t i n g straight leads (diameter: 4 ? 8 mm) lead and packaging code ea and ka e a d p e h e s i v e t a p p 1 h w l 0 w 2 w p 2 straight leads (diameter > 8) lead and packaging code ea and ka p 1 w d 0 h d 0 t a p m o u n t i n g e a a p e d h e s i v e t w h a d p e h e s i v e t a l 0 w 2 w d p 0 p 2 p 1 w p p p 1 d p 1 i 1 . 0 maximum - 1 . 0 + 1 . 0 t 1 h . 0 maximum - 1 . 0 + 1 . 0 t 1 . 0 maximum w - 1 . 0 + 1 . 0 t 1 . 0 maximum - 1 . 0 + 1 . 0 t
21 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 lead taping & packaging case size (mm) ammo reel w d w maximum maximum 2 0.5 +1/-0.1 4 230 340 42 350 30 50 5 x 5 C 7 230 340 42 6.3 x 5 C 7 275 340 42 8 x 5 C 9 235 340 45 5 x 11 230 340 48 6.3 x 11 270 340 48 8 x 11 235 340 48 8 x 14 C 20 240 340 57 10 x 12 250 340 52 10 x 15 C 19 256 340 57 10 x 22 C 25 250 340 60 12 270 340 57 13 285 340 62 16 265 340 62 single-ended aluminum electrolytic capacitors C esw series, +105oc h t w w h d ammo box reel
22 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 construction data the manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then formed to produce the aluminum oxide layer. both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. during the winding process, aluminum tabs are attached to each foil to provide the electrical contact. the deck, complete with terminals, is attached to the tabs and then folded down to rest on top of the winding. the complete winding is impregnated with electrolyte before being housed in a suitable container, usually an aluminum can, and sealed. throughout the process, all materials inside the housing must be maintained at the highest purity and be compatible with the electrolyte. each capacitor is aged and tested before being sleeved and packed. the purpose of aging is to repair any damage in the oxide layer and thus reduce the leakage current to a very low level. aging is normally carried out at the rated temperature of the capacitor and is accomplished by applying voltage to the device while carefully controlling the supply current. the process may take several hours to complete. damage to the oxide layer can occur due to variety of reasons: ? slitting of the anode foil after forming ? attaching the tabs to the anode foil ? minor mechanical damage caused during winding a sample from each batch is taken by the quality department after completion of the production process. this sample size is controlled by the use of recognized sampling tables def ned in bs 6001. the following tests are applied and may be varied at the request of the customer. in this case the batch, or special procedure, will determine the course of action. electrical: ? leakage current ? capacitance ? esr ? impedance ? tan delta mechanical/visual: ? overall dimensions ? torque test of mounting stud ? print detail ? box labels ? packaging, including packed quantity single-ended aluminum electrolytic capacitors C esw series, +105oc forming winding decking impregnation assembly testing sleeving packing extended cathode anode foil cathode foil tissues foil tabs aging etching
23 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america northeast wilmington, ma tel: 978-658-1663 southeast lake mary, fl tel: 407-855-8886 central novi, mi tel: 248-994-1030 irving, tx tel: 972-915-6041 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe sasso marconi, italy tel: 39-051-939111 skopje, macedonia tel: 389-2-55-14-623 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe wyboston, united kingdom tel: 44-1480-273082 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5877-1075 shanghai, china tel: 86-21-6447-0707 seoul, south korea tel: 82-2-6294-0550 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6701-8033 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. single-ended aluminum electrolytic capacitors C esw series, +105oc
24 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4009_esw ? 1/6/2016 disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. single-ended aluminum electrolytic capacitors C esw series, +105oc

▲Up To Search▲

Price & Availability of ESW188M050AM4

	To Download ESW188M050AM4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .